WW200 Wastewater Concrete and Coating
WW200 Wastewater Concrete & Coating is an acid-resistant, low-permeability solution for manholes, pipe linings, and wastewater infrastructure, offering quick curing and lasting protection.
ST200 is a sustainable, environmentally friendly stucco material with all the benefits of ultra high performance Cold Fusion Concrete.
ST200 Stucco is engineered for applications requiring a quick-curing, acid-resistant, and durable finish. Its versatility makes it ideal for a wide range of facade projects in both commercial and residential settings.
ST200 Cold Fusion Concrete is tested for acid resistance in various acids to ensure protection against chloride, sulfate, hydrocarbon, and solvent degradation.
Prep: For wood, remove dirt, debris, and incompatible coatings, ensuring the surface is dry. For concrete/masonry, clean the surface, remove debris and coatings, and keep it moist.
How To Apply: Mix 1.78 gallons of water per 55-lb bag for 2 to 4 minutes using a paddle mixer. Apply stucco with a hawk and trowel to the desired thickness, smoothing or texturing within 30 minutes. For spray applications, use rotor-stator, piston, or squeeze pumps, mixing the same ratio and applying to the desired thickness, smoothing or texturing within 30 minutes. Seal with Fusion Bond sealant or water-resistant paint after 4 days in warm weather (75°F+) or 7 days in cooler weather.
Cleanup: Clean all equipment immediately with water to prevent curing in the applicator.
Is ST200 right for your project? Please contact our team for assistance.
Our hands-on approach to training and support sets us apart, providing significantly better service than our competitors. We believe in empowering you with comprehensive training on our products before you apply them, ensuring successful and reliable outcomes.
WW200 Wastewater Concrete & Coating is an acid-resistant, low-permeability solution for manholes, pipe linings, and wastewater infrastructure, offering quick curing and lasting protection.
SL200 Self-Leveling Concrete is a durable, acid-resistant solution ideal for floor leveling and surface finishing in harsh industrial environments, offering rapid curing and minimal finishing.
A600 Cold Fusion Concrete is a variable aggregate concrete material designed specifically for resistance to hydrofluoric acid degradation in concentrations from .01 to 80% with little to no mass loss.